- built for maximum flexibility
- upto 1000 punching cycles per minute
- 36 turret stations standard
- keeping-touch index tool position (proprietory technology NISSHINBO, Japan)
- automatic strip-off detector, clamp-sensor
- rapid loading/unloading of tools
Parameter | Unit |
Nominal Presure | KN |
Max sheet dimension | mm |
Carbon steel sheet | mm |
Stainless steel sheet | mm |
Max one-time punching diameter | |
Dies | |
Punching Accuracy | mm |
Punching cycles per minute | cpm |
Max punching frequency | cpm |
Max sheet speed | m/min |
Turret speed | rpm |
Axes of control | |
Main power | kW |
Air presure | Mpa |
Overall dimension(LxWxH) | mm |
Weight | kg |
HPI-3044 | HPI-3047 | HPI-3048 | ||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
HPI-3057 | HPI-3058 | ||||||||||||||||||||||||||||||||
|
|
Hydraulic System
H+L hydraulic system completely from Germany, with cooling device of oil temperature, low energy consumption and little volume.
Hardened Die Bush
Turret adopt a sleeve structure, prolonging the service life, the die bush has a higher hardened surface, good antiwearability and easy to change.
CNC System
Driving Turret
Compact structure, high precision of driving, reliable and stable.
Turret & Index Tools
Thrick turret structure, better guiding and higher precision.
Keeping-touch index tool position, higher precision and efficiency.
Lower Die Rapid Unloading
Lower die rapid loading and unloading accurately, rapidly, and conveniently
CNC controller is 802DSL from SIEMENS, Germany
Hydraulic system is a complete set of HKL-VT from H+L, Germany
Standard tool station number: 36LA2(B)
Side-positioning device by manual
Equipped with brush worktable
Lubrication system by manual pump
Automatic strip-off detector, clamp-sensor
Lamp for tooling change
Often-use internal hexagonal key spanner for adjusting tools
It has functions of punching, forming, wheel ribbing function etc.
CNC controller change to FANUC Oi-PC, Japan
CNCKAD (Israel) Software
RADAN (England) Software
Air-condition for e-cabinet (700W)
Moveable operating station
Equipped with tooling hoisting device by pneumatic cylinder, replace tooling device and table
Equipped with automatic lubricant
Equipped with blow and air mist system
Turret tooling station changed to 26LA2(B)
Turret tooling station changed to 40LA2(D)
Equipped with turret table with station by 38LA2(D)(Inc. one fixed D station)
The location pin automatic up and down by pneumatic cylinder
Extra standard clamp
Full floating clamp
Location pin in the table-middle automatic up and down by pneumatic cylinder
Stainless worktable with steel balls
Leuze light curtain with mirrors around the machine for safety guarding
Extra working table size by 1300*835mm/piece
Mobil hydraulic oil with the machine
Change to HCC hydraulic system,from H+L company,Germany